Tuesday, October 25, 2011
How to change alignment in IBM english/arabic word processor?
I took arabic once. I took Arabic one for three years before they kicked me out of the class.
How do i change a list i made in ms word processor to alphabetical ?
Microsoft Word 2003 can sort text, such as a list of peoples' names, class names, names of inventory items, etc. However, the option is somewhat hidden under the %26quot;Sort%26quot; menu.
To sort text, such as a list of names:
1. Highlight the list of names with your mouse.
2. Choose %26quot;Table%26quot; then %26quot;Sort%26quot;.
3. The %26quot;Sort Text%26quot; dialog box should appear. Most likely you will not have to make any changes. However, if you desire, click the %26quot;Descending%26quot; radio button to sort the text in descending order.
4. Click %26quot;OK%26quot; to close the dialog box.How do i change a list i made in ms word processor to alphabetical ?If each of the items to be sorted is in a paragraph by itself, do this:
In Word versions prior to Word 2007:
1. Select all the paragraphs.
2. Click the Table-%26gt;Sort menu item (trust me!).
3. Set up the sort the way you want.
4. Click OK.
In Word 2007:
1. Select all the paragraphs.
2. Click the Home tab on the ribbon.
3. In the Paragraph group, click the AZ鈫?button.
Hope that helps.How do i change a list i made in ms word processor to alphabetical ?If you're using Word 2007 then the option is %26quot;hidden in plain view%26quot;, as these things often are.
Select your list and on the Home tab in the Paragraph group there is a button that has an A on top of a Z next to an arrow pointing downwards. Press the button and the Sort Text dialog will appear...How do i change a list i made in ms word processor to alphabetical ?you can't. if the list is short enough i suggest re-typing them in alphabetical order, if not then, it would probaly be best just to ignore it, unless you really need to alphabetically order it, where you can only re-do the whole list.How do i change a list i made in ms word processor to alphabetical ?Select (highlight) the list then go to the Table menu and choose Sort. Then you can choose ascending or descending. It works even if the list is not in a table.
To sort text, such as a list of names:
1. Highlight the list of names with your mouse.
2. Choose %26quot;Table%26quot; then %26quot;Sort%26quot;.
3. The %26quot;Sort Text%26quot; dialog box should appear. Most likely you will not have to make any changes. However, if you desire, click the %26quot;Descending%26quot; radio button to sort the text in descending order.
4. Click %26quot;OK%26quot; to close the dialog box.How do i change a list i made in ms word processor to alphabetical ?If each of the items to be sorted is in a paragraph by itself, do this:
In Word versions prior to Word 2007:
1. Select all the paragraphs.
2. Click the Table-%26gt;Sort menu item (trust me!).
3. Set up the sort the way you want.
4. Click OK.
In Word 2007:
1. Select all the paragraphs.
2. Click the Home tab on the ribbon.
3. In the Paragraph group, click the AZ鈫?button.
Hope that helps.How do i change a list i made in ms word processor to alphabetical ?If you're using Word 2007 then the option is %26quot;hidden in plain view%26quot;, as these things often are.
Select your list and on the Home tab in the Paragraph group there is a button that has an A on top of a Z next to an arrow pointing downwards. Press the button and the Sort Text dialog will appear...How do i change a list i made in ms word processor to alphabetical ?you can't. if the list is short enough i suggest re-typing them in alphabetical order, if not then, it would probaly be best just to ignore it, unless you really need to alphabetically order it, where you can only re-do the whole list.How do i change a list i made in ms word processor to alphabetical ?Select (highlight) the list then go to the Table menu and choose Sort. Then you can choose ascending or descending. It works even if the list is not in a table.
How do I change to VGA resolution?
I successfully used a trial version of Adobe Photoshop Elements 5.0 without any difficulty, so I ordered the software. (not from Adobe, but cheaper form another reliable vendor) However, during the setup process I received the error message %26quot;This program required VGA resolution or higher.%26quot; I have a hp 2.60 gHz Intel Pentium processor; how do I make this change and would it mess anything else up?How do I change to VGA resolution?Like the rest said - ensure that you're running at at least 640x480 with 256 (8-bit) colors. It seems like you're running at some other resolution with just 16 colors, if you can't get it any higher than that you should probably install graphics drivers for your graphics card. If you don't have the special drivers for your card, then you won't be able to change the video mode to what is required, and they'll be set on minimum.How do I change to VGA resolution?Right click your desktop and go to properties. Go to settings tab and choose a resolution of 800x600 or better..How do I change to VGA resolution?Right click anywhere on your Desktop and select Properties.
Click on the Settings tab and change your resolution there.How do I change to VGA resolution?Right click on a blank portion of your desktop.. select properties. .. select the settings tab and move the slide bar at the bottom left to the right to get a higher resolution (that is what the program wants)straight hair hair clippers
Click on the Settings tab and change your resolution there.How do I change to VGA resolution?Right click on a blank portion of your desktop.. select properties. .. select the settings tab and move the slide bar at the bottom left to the right to get a higher resolution (that is what the program wants)
How do I change to VGA resolution?
I successfully used a trial version of Adobe Photoshop Elements 5.0 without any difficulty, so I ordered the software. (not from Adobe, but cheaper form another reliable vendor) However, during the setup process I received the error message %26quot;This program required VGA resolution or higher.%26quot; I have a hp 2.60 gHz Intel Pentium processor; how do I make this change and would it mess anything else up?How do I change to VGA resolution?Issue
When you start the installer for Adobe Photoshop Elements 5.0, the Photoshop Elements installer displays the warning message, %26quot;This program required VGA resolution or higher%26quot; and then quits.
Details
The resolution of your monitor is set to less than 1024x768 pixels.
Solution: Increase the resolution of your monitor to 1024x768 pixels.
1. Choose Start %26gt; Settings %26gt; Control Panel.
2. Open the Display control panel.
3. Click on the Settings tab.
4. In the Screen Resolution area, move the slider to the right until the value is 1024x768 or higher.
5. Click OK.
Background information
The minimum monitor resolution required Photoshop Elements 5.0 is 1024x768 pixels. The installer checks the monitor resolution and quits if the monitor does not meet the minimum system requirements.
For a complete list of the minimum system requirements for Photoshop Elements 5.0, visit the Adobe web site at www.adobe.com/products/photoshopelwin/sy?.
Hope it helps:)
When you start the installer for Adobe Photoshop Elements 5.0, the Photoshop Elements installer displays the warning message, %26quot;This program required VGA resolution or higher%26quot; and then quits.
Details
The resolution of your monitor is set to less than 1024x768 pixels.
Solution: Increase the resolution of your monitor to 1024x768 pixels.
1. Choose Start %26gt; Settings %26gt; Control Panel.
2. Open the Display control panel.
3. Click on the Settings tab.
4. In the Screen Resolution area, move the slider to the right until the value is 1024x768 or higher.
5. Click OK.
Background information
The minimum monitor resolution required Photoshop Elements 5.0 is 1024x768 pixels. The installer checks the monitor resolution and quits if the monitor does not meet the minimum system requirements.
For a complete list of the minimum system requirements for Photoshop Elements 5.0, visit the Adobe web site at www.adobe.com/products/photoshopelwin/sy?.
Hope it helps:)
How can i change the clock speed on my computer?
I have a dell optiplex ggx240 with a p4 processor i usually can get to change the clock speed but for some reason i can figure it on a dell since they have soly thre own software and everyting on there computers. Its a p4 running currently at 1.5 i wanna get it to at least 1.8 - 2.0 if possible someone hlep me out ehre im in school for computers but havent gotten that far in depth with them yet all help given is greatly apperciatedHow can i change the clock speed on my computer?So you are saying you want to OVERclock your computer?
Well you can't with a Dell, they don't allow overclocking. Even if it were possible, an optiplex has no airflow and would fry.
Get a real motherboard, real case, and then try.How can i change the clock speed on my computer?Well,I've been in the computers field for the past 10 years, but i never hear a case like yours. The only way to change the clock speed of your computer is to change your processor. You cannot change the clock speed of your processor. How ever you can re-program your processor using low level debugging softwares and Microsoft Assembly Language, but you need to be an expert in computer architechture. Even then you cannot change your processor's clock speed.How can i change the clock speed on my computer?You can do it, however is very dangerous. The processor is designed to work at one speed, and if you overclock that speed its expected life will be shorter because of the heating irradiated. Before change the clocking i will suggest to get a new special cooling fan and replace the original.Then you can play with it going to the bios and changing the clock.
Well you can't with a Dell, they don't allow overclocking. Even if it were possible, an optiplex has no airflow and would fry.
Get a real motherboard, real case, and then try.How can i change the clock speed on my computer?Well,I've been in the computers field for the past 10 years, but i never hear a case like yours. The only way to change the clock speed of your computer is to change your processor. You cannot change the clock speed of your processor. How ever you can re-program your processor using low level debugging softwares and Microsoft Assembly Language, but you need to be an expert in computer architechture. Even then you cannot change your processor's clock speed.How can i change the clock speed on my computer?You can do it, however is very dangerous. The processor is designed to work at one speed, and if you overclock that speed its expected life will be shorter because of the heating irradiated. Before change the clocking i will suggest to get a new special cooling fan and replace the original.Then you can play with it going to the bios and changing the clock.
How can you change what you open an attachment with?
Before i had microsoft word, i had to open it with my word processor. But now i want to change it. How can i change it to open attachments using microsoft word?How can you change what you open an attachment with?When you save a document, there is an option at the bottom what type of file you want to save it as.
Changing your mainboard and processor?
i'm still trying to learn about computers and how they work, so lets say that i found a good deal on a computer but the mainboard only accepts a dual core processor..... what do i need to know and or find out before i log on to newegg and get a motherboard that will handle a quad core?Changing your mainboard and processor?Are you talking about a build-it-yourself kit or a brand-name computer?
For custom machines, you can just pick a motherboard which supports the processor type you want. Many merchants who sell systems like that will often let you specify the changes you want before it's built (which is the way to go)
On brand-name computers like Dell, Sony, HP, Compaq etc- switching the motherboard invalidates the factory-installed operating system. You'd have to buy another retail copy of Windows to install because the preinstalled OEM versions are tied to the original motherboard. If that changes, their restore programs or CDs no longer work.
What applications do you need the computer for? Quads offer big advantages for video editing, 3D design/animation work and heavy mutlitasking, but not for gaming. The 3Ghz dual-core E8400 is much faster at gaming than the 2.4Ghz quad-core Q6600 and actually costs a little less.
The only info you'll really need is the existing computer's physical case form factor (either full ATX, Micro ATX etc) Just log onto Newegg, choose whether you're going Intel or AMD, and start searching motherboards of the appropriate type (Socket 775, for example) and make a note of which processor types are supported.
Be sure to read the customer reviews of motherboards you're considering.Changing your mainboard and processor?You need to know the form factor of the motherboard and the case. Its best to check the manufacturers website to get the exact dimensions of the case just to see if your going to have enough room for power supply unit, fans, hard drives and your add on cards. You want enough room to work in there and allow for some decent airflow.
You need to make sure that your power supply gives enough output for what you need, is there enough RAM slots, PCI express if you want it, does it use SATA or PATA connections for the drives.
Try finding reviews for boards your interested in on sites like toms hardware to give you and idea of what they perform like.
For custom machines, you can just pick a motherboard which supports the processor type you want. Many merchants who sell systems like that will often let you specify the changes you want before it's built (which is the way to go)
On brand-name computers like Dell, Sony, HP, Compaq etc- switching the motherboard invalidates the factory-installed operating system. You'd have to buy another retail copy of Windows to install because the preinstalled OEM versions are tied to the original motherboard. If that changes, their restore programs or CDs no longer work.
What applications do you need the computer for? Quads offer big advantages for video editing, 3D design/animation work and heavy mutlitasking, but not for gaming. The 3Ghz dual-core E8400 is much faster at gaming than the 2.4Ghz quad-core Q6600 and actually costs a little less.
The only info you'll really need is the existing computer's physical case form factor (either full ATX, Micro ATX etc) Just log onto Newegg, choose whether you're going Intel or AMD, and start searching motherboards of the appropriate type (Socket 775, for example) and make a note of which processor types are supported.
Be sure to read the customer reviews of motherboards you're considering.Changing your mainboard and processor?You need to know the form factor of the motherboard and the case. Its best to check the manufacturers website to get the exact dimensions of the case just to see if your going to have enough room for power supply unit, fans, hard drives and your add on cards. You want enough room to work in there and allow for some decent airflow.
You need to make sure that your power supply gives enough output for what you need, is there enough RAM slots, PCI express if you want it, does it use SATA or PATA connections for the drives.
Try finding reviews for boards your interested in on sites like toms hardware to give you and idea of what they perform like.
Default word processor?
When I click on a document, it opens with Notepad, which I
don't rate - it is inconsistant, quirky, and to be honest - rubbbish. I want it to open Word Pad. How do I change the
default word processor?Default word processor?Right click any document, and choose %26quot;Open With...%26quot; and then %26quot;Choose Program%26quot; (even if WordPad is on the list).
Then, select WordPad from the list (if it isn't in the list, click Browse and find it.)
Then check the box that says: %26quot;Always use the selected program to open this kind of file%26quot;
Click OK and you're done.Default word processor?Right click on the document you want to open, then choose %26quot;open with%26quot;
Browse to c:\windows\system32\write.exeDefault word processor?Notepad...rubbish. Blasphemy!Default word processor?If you know that your documents were created in note pad, you should click on word pad from your asserories in all programs. Once you are there, make sure the file type is in the text mode than retrieve the document. When you are finish with the document, save it.
Remember you have to select the write program when creating text files. Notepad isn't a wordprocessor file. This program is designed for notations. Normally, programmers use this program for documentation.
Wordpad is just a mini wordprocessor file, It normally designed to be use for screen shots. But if you are comfortable of using this program then select it from all programs in accessories.
Just remember always create your documents in the appropriate programs.pink hair wavy hair
don't rate - it is inconsistant, quirky, and to be honest - rubbbish. I want it to open Word Pad. How do I change the
default word processor?Default word processor?Right click any document, and choose %26quot;Open With...%26quot; and then %26quot;Choose Program%26quot; (even if WordPad is on the list).
Then, select WordPad from the list (if it isn't in the list, click Browse and find it.)
Then check the box that says: %26quot;Always use the selected program to open this kind of file%26quot;
Click OK and you're done.Default word processor?Right click on the document you want to open, then choose %26quot;open with%26quot;
Browse to c:\windows\system32\write.exeDefault word processor?Notepad...rubbish. Blasphemy!Default word processor?If you know that your documents were created in note pad, you should click on word pad from your asserories in all programs. Once you are there, make sure the file type is in the text mode than retrieve the document. When you are finish with the document, save it.
Remember you have to select the write program when creating text files. Notepad isn't a wordprocessor file. This program is designed for notations. Normally, programmers use this program for documentation.
Wordpad is just a mini wordprocessor file, It normally designed to be use for screen shots. But if you are comfortable of using this program then select it from all programs in accessories.
Just remember always create your documents in the appropriate programs.
How to change the page direction in microsoft works word processor program???!!!!?
i got recently a laptop with many programs pre-installed, one of these is word processor which is very similar to microsoft office word.... the only thing i couldn't find is how to change the page direction and make it from right to left to write with languages such arabic.
although i managed to install the arabic letters from the control panel but i couldn't find any hint how to change the page direction (there is no tool bar support this feature in word processor while it exist in the regular word)
please help asap......
thxHow to change the page direction in microsoft works word processor program???!!!!?I want the answer too! Irecently I met this trouble!
although i managed to install the arabic letters from the control panel but i couldn't find any hint how to change the page direction (there is no tool bar support this feature in word processor while it exist in the regular word)
please help asap......
thxHow to change the page direction in microsoft works word processor program???!!!!?I want the answer too! Irecently I met this trouble!
How do you change the header/footer in Microsoft Works Word Processor?
I want to put my name %26amp; page number in the header. But only on the 1st page. I don't want my name on the 2nd page, only the page number.
1st: name, class, date....................................?#
2nd:..................................?#
3rd:..................................?#How do you change the header/footer in Microsoft Works Word Processor?Inasmuch as Works Word Processor doesn't support section breaks like Word does, I don't think there's any way to have multiple headers in a single document.
Sorry.
1st: name, class, date....................................?#
2nd:..................................?#
3rd:..................................?#How do you change the header/footer in Microsoft Works Word Processor?Inasmuch as Works Word Processor doesn't support section breaks like Word does, I don't think there's any way to have multiple headers in a single document.
Sorry.
Can you change one' laptop dual core processor to 2 dual core ? If yes then how ?
Change dual core to 2 dual core?? What exactly do you mean, making it a quad core?
Generally, if you don't have a huge amount of experience with building computers, I would say don't touch the processor. A lot of things have to be just right or your computer could have a quick and painful death.Can you change one' laptop dual core processor to 2 dual core ? If yes then how ?No you can't
Generally, if you don't have a huge amount of experience with building computers, I would say don't touch the processor. A lot of things have to be just right or your computer could have a quick and painful death.Can you change one' laptop dual core processor to 2 dual core ? If yes then how ?No you can't
How to convert the keyboard to write with the proper accents for another language ?
I need a little help I'm trying to write in another language on the word processor but the punctuation and accents, it keeps on changing words into English is there a way to change language on word processor.
Thank you in advance. How to convert the keyboard to write with the proper accents for another language ?You can turn autocorrecting and autoformatting off so it won't change the words. I think you can find the options in the Tools menu depending on which version you're using. If you can't find them, search for those commands in the Help menu.
Thank you in advance. How to convert the keyboard to write with the proper accents for another language ?You can turn autocorrecting and autoformatting off so it won't change the words. I think you can find the options in the Tools menu depending on which version you're using. If you can't find them, search for those commands in the Help menu.
I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?
and i awnt to change only my Processor to core to duo latest how much wud it cost..I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?You might need more than just a new CPU depending on your current motherboard make/model. A Core 2 CPU is a Socket 775 package (the configuration of the pins on the CPU chip, which has to fit the CPU socket on the motherboard) so you need to figure out if your motherboard is a 775 or not. Run this program:
http://www.cpuid.com/download/cpuz_146.z
Look for the line %26quot;Package%26quot; and see if it says about your current CPU. If it is a 775 then you research your motherboard to see what CPUs it can accept: Run CPU-Z (link above) go to the %26quot;mainboard%26quot; tab in it's main window, and google your motherboard by it's Manufacturer and Model.
If your current motherboard is not a 775 then you will probably need a new motherboard, CPU, and RAM and possibly a new video card depending on what you pick for a motherboard.I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?go to newegg.com and secondly figure out ur motherboard, cuz u can only upgrade processor if it works with the mother board, or ull have to upgrade bothI have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?that would depend if your motherboard supports it. witch i do not think it would. New motherboard $80 and new duo processor at 2.4ghx about $140I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?1: Look up your motherboard to make sure it can handle a Core2Duo. This might require you to crack the case and look for a model # on the system board or if this was a system you purchases from a dealer, look it up on the manufacturer's site.
#2: Check out NewEgg.com for the list of current Core2Duo processors and their prices.I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?app. $100.00I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?First, you need to know if your mobo can support one. As for a CPU itself, it can cost $100-$200.I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?if its an old computer made for p4 you will most likely need a new mother board hense new ram but can keep the graphic card if its PCIhair cut styles shared hosting
http://www.cpuid.com/download/cpuz_146.z
Look for the line %26quot;Package%26quot; and see if it says about your current CPU. If it is a 775 then you research your motherboard to see what CPUs it can accept: Run CPU-Z (link above) go to the %26quot;mainboard%26quot; tab in it's main window, and google your motherboard by it's Manufacturer and Model.
If your current motherboard is not a 775 then you will probably need a new motherboard, CPU, and RAM and possibly a new video card depending on what you pick for a motherboard.I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?go to newegg.com and secondly figure out ur motherboard, cuz u can only upgrade processor if it works with the mother board, or ull have to upgrade bothI have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?that would depend if your motherboard supports it. witch i do not think it would. New motherboard $80 and new duo processor at 2.4ghx about $140I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?1: Look up your motherboard to make sure it can handle a Core2Duo. This might require you to crack the case and look for a model # on the system board or if this was a system you purchases from a dealer, look it up on the manufacturer's site.
#2: Check out NewEgg.com for the list of current Core2Duo processors and their prices.I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?app. $100.00I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?First, you need to know if your mobo can support one. As for a CPU itself, it can cost $100-$200.I have a p4 2gb ram 3 ghz and nvidia geforce 8600gt video card ?if its an old computer made for p4 you will most likely need a new mother board hense new ram but can keep the graphic card if its PCI
How do i change the margin on microsoft works word processor to 1"?
File --%26gt; Page Setup... --%26gt; under the setting drop down menu choose Microsoft Word --%26gt; click margins... --%26gt; then set top bottom left and rightHow do i change the margin on microsoft works word processor to 1%26quot;?Go into your File menu %26gt;%26gt; Page Setup %26gt;%26gt; Margins will be listed, just change them to what you want.
Fifa 10 runs slow on my pc and i want to know how to resolve.It runs only one processor inspite selecting all?
My fifa 10 always runs on one processor speed and it still runs on one processor when i change the affinity to all processors
I am having a new DELL laptop with core i3 which has 4 processor core and whenever i play fifa 10 it show CPU usage on 25 out of 100 which means it runs on only one processor as a result the game works slow.
On the first try it worked fine but on the next day this problem started to happen
This problem also happens on my desktop computer which has dual core which has two processors and it shows 50 out of 100 processor usage which means again it runs on only one of the processor
Even after changing the affinity it continues to show 50 out of 100 while all the processors are ticked.
Please help
Thanks in advanceFifa 10 runs slow on my pc and i want to know how to resolve.It runs only one processor inspite selecting all?The Windows Registry is the master control center for your operating system and applications it runs. Corruption or overload registry issues can cause all sorts of pc performance problems, including poor application startup times, slow Windows start-up, extremely slow shut down, slow internet surfing,inability to resume from computer sleep and more.Cleaning,compacting, and optimizing your Windows registry can go a long way to dramatically speeding up your computer檚 performance, start-up and shutdown speed.
Recommended: Run a Registry Scan http://make-a-computer-run-better.com Now to Detect Errors and Improve your PC檚 speed instantly!Fifa 10 runs slow on my pc and i want to know how to resolve.It runs only one processor inspite selecting all?When it comes to speed, it has nothing to do with CPU USAGE. Just go to display options of FIFA, and reduce the video resolution...probably to 800*600.Fifa 10 runs slow on my pc and i want to know how to resolve.It runs only one processor inspite selecting all?firstly, u need to understand how a processor works. for every process in the background your processor uses certain memory like maintaining hardware connectivity, audio driver and tray section,etc. after this there are certain system process which cannot be stopped and are crucial for the computer. so your processor will never give 100% percent.
SOLUTION to your problem is a good expensive graphics card because expensive ones have better graphics than the cheap ones. preferably 1gb would be good but if u don't have money go for 512mb and if u have more money then directly buy 2gb.
Enjoy your gaming experience....take care,,,,byeFifa 10 runs slow on my pc and i want to know how to resolve.It runs only one processor inspite selecting all?If your PC is running slow, I recommend you to check your pc heath online, then you can hnow why it is slow
and fix easily. ,
Recommended website:
http://pc-check-tools.com/Slow_PCFifa 10 runs slow on my pc and i want to know how to resolve.It runs only one processor inspite selecting all?To determine if your system is in fact running slow because of problems in your registry, you will need to run a self diagnostic program such as regcure
go to:
http://tpdownload.net
This easy to use program will perform a deep scan on your computer and will report back on any issues or problems it finds for you at no charge - which means you can figure out what is wrong without having to buy anything in advance or pay a technician to essentially perform the same function.
Let Faster your PC!
I am having a new DELL laptop with core i3 which has 4 processor core and whenever i play fifa 10 it show CPU usage on 25 out of 100 which means it runs on only one processor as a result the game works slow.
On the first try it worked fine but on the next day this problem started to happen
This problem also happens on my desktop computer which has dual core which has two processors and it shows 50 out of 100 processor usage which means again it runs on only one of the processor
Even after changing the affinity it continues to show 50 out of 100 while all the processors are ticked.
Please help
Thanks in advanceFifa 10 runs slow on my pc and i want to know how to resolve.It runs only one processor inspite selecting all?The Windows Registry is the master control center for your operating system and applications it runs. Corruption or overload registry issues can cause all sorts of pc performance problems, including poor application startup times, slow Windows start-up, extremely slow shut down, slow internet surfing,inability to resume from computer sleep and more.Cleaning,compacting, and optimizing your Windows registry can go a long way to dramatically speeding up your computer檚 performance, start-up and shutdown speed.
Recommended: Run a Registry Scan http://make-a-computer-run-better.com Now to Detect Errors and Improve your PC檚 speed instantly!Fifa 10 runs slow on my pc and i want to know how to resolve.It runs only one processor inspite selecting all?When it comes to speed, it has nothing to do with CPU USAGE. Just go to display options of FIFA, and reduce the video resolution...probably to 800*600.Fifa 10 runs slow on my pc and i want to know how to resolve.It runs only one processor inspite selecting all?firstly, u need to understand how a processor works. for every process in the background your processor uses certain memory like maintaining hardware connectivity, audio driver and tray section,etc. after this there are certain system process which cannot be stopped and are crucial for the computer. so your processor will never give 100% percent.
SOLUTION to your problem is a good expensive graphics card because expensive ones have better graphics than the cheap ones. preferably 1gb would be good but if u don't have money go for 512mb and if u have more money then directly buy 2gb.
Enjoy your gaming experience....take care,,,,byeFifa 10 runs slow on my pc and i want to know how to resolve.It runs only one processor inspite selecting all?If your PC is running slow, I recommend you to check your pc heath online, then you can hnow why it is slow
and fix easily. ,
Recommended website:
http://pc-check-tools.com/Slow_PCFifa 10 runs slow on my pc and i want to know how to resolve.It runs only one processor inspite selecting all?To determine if your system is in fact running slow because of problems in your registry, you will need to run a self diagnostic program such as regcure
go to:
http://tpdownload.net
This easy to use program will perform a deep scan on your computer and will report back on any issues or problems it finds for you at no charge - which means you can figure out what is wrong without having to buy anything in advance or pay a technician to essentially perform the same function.
Let Faster your PC!
Can you change the amount of processors used during boot on Windows XP?
I know you can do this on Windows Vista but can it be done on Windows XP Pro? If your not completely what my question is have a look at the link and that might help you understand my question, thanks.
Heres how its done in Vista if anyone is wondering:
http://www.maximumpcguides.com/increase-the-number-of-processors-used-to-boot-windows-vista/Can you change the amount of processors used during boot on Windows XP?Start
Run
msconfig
enter
BOOT.INI
Advanced...
Check /NUMPROC
Select the highest number of CPUs available
OK
OK
RestartCan you change the amount of processors used during boot on Windows XP?It is same in XP also
but screen shots are different
it will spped up u'r time
Select it as best ans.
Heres how its done in Vista if anyone is wondering:
http://www.maximumpcguides.com/increase-the-number-of-processors-used-to-boot-windows-vista/Can you change the amount of processors used during boot on Windows XP?Start
Run
msconfig
enter
BOOT.INI
Advanced...
Check /NUMPROC
Select the highest number of CPUs available
OK
OK
RestartCan you change the amount of processors used during boot on Windows XP?It is same in XP also
but screen shots are different
it will spped up u'r time
Select it as best ans.
How do I change a document from English to Spanish in word processor?
I have a report due but it needs to be in spanish and unfortunetly i don't write in spanish.How do I change a document from English to Spanish in word processor?If your using any microsft proccesing software. Write your document in english first then highlight it and right click translation is an option on the list click it and you can translate quickly and into many languages.
How do i change the margins to one inch on microsoft works word processor?
Is it different from microsoft word?How do i change the margins to one inch on microsoft works word processor?Not much. File-%26gt;Page Setup.
Hope that helps.Echo home bedding brown hair
Hope that helps.
How do i change color of page in microsoft word processor for vista home or if its possible?
i know before i would do format and then page but that was on xp dont seem to see it on vista was wondering if maybe theres another wayHow do i change color of page in microsoft word processor for vista home or if its possible?Try the Page Layout ribbon tab, Watermark-%26gt;Custom Watermark. Also, here's how to be sure it will print in W0rd 2007:
1. Click the round Office button in the upper-left corner of the window.
2. Click the Word Options button.
3. Click the Display section.
4. Check Print Drawings Created In Word.
5. Check Print Background Colors and Images.
6. Click OK.
Finally, here are a bunch of tips for using Word 2007:
Most of what used to be under Tools-%26gt;Options is now accessible this way:
1.Click the round Office button in the upper-left corner of the window.
2.Click the Word Options button.
The ALT key, if pressed by itself, will bring up flags for some of the old ALT keysrokes that may help.
Similarly, ALT/F goes to the Office button檚 file menu. At least some of the secondary keystrokes (ALT/F A for File-%26gt;Save As, for instance), seem to still be there.
Many of the old keyboard shortcuts (CTRL/A, CTRL/S, CTRL/O, for instance) still work.
Most of the old dialog boxes are still there, often one level under the Ribbon's interface. In particular, any group on a Ribbon tab that has a little arrow in the lower right corner leads to that old familiar dialog box when you click the arrow.
Remember the right-click and use it. It檚 still the fastest way to Font and Paragraph.
Sincerely hope that helps.
1. Click the round Office button in the upper-left corner of the window.
2. Click the Word Options button.
3. Click the Display section.
4. Check Print Drawings Created In Word.
5. Check Print Background Colors and Images.
6. Click OK.
Finally, here are a bunch of tips for using Word 2007:
Most of what used to be under Tools-%26gt;Options is now accessible this way:
1.Click the round Office button in the upper-left corner of the window.
2.Click the Word Options button.
The ALT key, if pressed by itself, will bring up flags for some of the old ALT keysrokes that may help.
Similarly, ALT/F goes to the Office button檚 file menu. At least some of the secondary keystrokes (ALT/F A for File-%26gt;Save As, for instance), seem to still be there.
Many of the old keyboard shortcuts (CTRL/A, CTRL/S, CTRL/O, for instance) still work.
Most of the old dialog boxes are still there, often one level under the Ribbon's interface. In particular, any group on a Ribbon tab that has a little arrow in the lower right corner leads to that old familiar dialog box when you click the arrow.
Remember the right-click and use it. It檚 still the fastest way to Font and Paragraph.
Sincerely hope that helps.
I want to install a new processor in my computer, how do I change the settings?
I have a 500 in my computer now but I want to put in a 800.I want to install a new processor in my computer, how do I change the settings?First make sure the processor is compatible, then plug it in- make sure theres thermal grease under it, it's plugged in right, and there's a fan on top of it- also with thermal grease on the heat sink if you got one. Make sure to ground yourself too, with an anti static strap if you can. Anyways, compatibility should not be an issue, I don't think that you need drivers for processors, but if anything you should need to change things in the BIOS, by pressing F2 or Delete, depending on the manufacturer, on startup- it tells you.
Should work.
Good luck! :)I want to install a new processor in my computer, how do I change the settings?If your 800 processor physically fits on Mother board. Then it would work without altering any settings. Bios detects cpu automatically.
Should work.
Good luck! :)I want to install a new processor in my computer, how do I change the settings?If your 800 processor physically fits on Mother board. Then it would work without altering any settings. Bios detects cpu automatically.
How do I change my line spacing to exactly 24 points on Works Processor?
I have an essay to write and the guidlines say in MLA format but instead of double spacing it says exactly 24 pts in line spacing. I have works processor so it doesn't have the options of Word, can someone hlep me plz???How do I change my line spacing to exactly 24 points on Works Processor?You should tell your teacher to stop being such a goof. And starting being such an un-goof.
Can you change the default font in Microsoft Works Word Processor?
I hate typing in anything besides Courier New and I'd love if I could change the default font setting to automatically be in that font so I don't have to take the extra time to change it. It's such a pain if I'm just typing myself a note or something. But I can't concentrate on what I'm writing if I'm preoccupied with how much I hate all other fonts...Can you change the default font in Microsoft Works Word Processor?I don't think there is a way. If you're used to Word, Works Word processor will leave you crying for lost features.
Sorry.
Sorry.
How to improve this self built computer without changing the price.?
I am saving up for a self built computer. I have retrieved all of this information of newegg which is where i will be buying all of this for $925. If you can find anyways to improve this without changing the price q whole lot please let me know.
Case---COOLER MASTER HAF 932 RC-932-KKN1-GP Black Steel ATX Full Tower Computer Case.
Graphics card---EVGA 512-P3-N884-TR GeForce 9800 GTX+ Superclocked 512MB 256-bit DDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
Processor---Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W Dual-Core Processor
Motherboard---EVGA 132-CK-NF78-TR LGA 775 NVIDIA nForce 780i SLI ATX Intel Motherboard.
Power supply---CORSAIR CMPSU-850TX 850W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready Active PFC Power Supply.
RAM---OCZ NVIDIA SLI-Ready Edition 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory.
Hard drive---Western Digital Caviar SE16 WD6400AAKS 640GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5%26quot; Hard Drive
cd/dvd drive---Sony Optiarc Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM 2MB Cache SATA DVD/CD Rewritable Drive.How to improve this self built computer without changing the price.?I would suggest a range of new parts for this, Mainly Mobo, Ram, CPU and Video cardfor hunting squirrel long hair cut
Case---COOLER MASTER HAF 932 RC-932-KKN1-GP Black Steel ATX Full Tower Computer Case.
Graphics card---EVGA 512-P3-N884-TR GeForce 9800 GTX+ Superclocked 512MB 256-bit DDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
Processor---Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W Dual-Core Processor
Motherboard---EVGA 132-CK-NF78-TR LGA 775 NVIDIA nForce 780i SLI ATX Intel Motherboard.
Power supply---CORSAIR CMPSU-850TX 850W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready Active PFC Power Supply.
RAM---OCZ NVIDIA SLI-Ready Edition 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory.
Hard drive---Western Digital Caviar SE16 WD6400AAKS 640GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5%26quot; Hard Drive
cd/dvd drive---Sony Optiarc Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM 2MB Cache SATA DVD/CD Rewritable Drive.How to improve this self built computer without changing the price.?I would suggest a range of new parts for this, Mainly Mobo, Ram, CPU and Video card
How to change a file to rich text format on Microsoft word processor?
Its for a school assignment. The professor said he has an older version of microsoft word and asked me to change it to rich text format. How do I do that?How to change a file to rich text format on Microsoft word processor?Try this:
In versions of Word prior to Word 2007:
1. Click the File-%26gt;Save As menu item.
2. Down in the Save as Type list box, select Rich Text Format.
3. Save the file.
In Word 2007:
1. Click the round Office button in the upper-left corner of the window.
2. Click Save As-%26gt; Other formats.
3. Continue as in Step 2, above.
Hope that helps.How to change a file to rich text format on Microsoft word processor?Go to the top left where it says File and left click... go to Save As and then when the dialog box pops up name the file and then right below it you will be able to select the file type. You will be able to save it as a RTF file.
Be warned that you could change the formatting when doing this.How to change a file to rich text format on Microsoft word processor?Run MS Word.
Open your RTF document in MS Word.
Click on the %26quot;File%26quot; menu.
Choose %26quot;Save As...%26quot; and make sure that %26quot;Word Document%26quot; is selected in the %26quot;Save as type%26quot; box.
Save As... Word Document
Enter the file name you wish or leave it as it is. This will keep the
same name as your RTF document, but convert it to Word-format.
Click %26quot;Save%26quot;.
source:
http://www.wikihow.com/Convert-an-RTF-File-into-MS-Word-DocumentHow to change a file to rich text format on Microsoft word processor?in ms word, you have option as save as in that you can save it in rich text format
In versions of Word prior to Word 2007:
1. Click the File-%26gt;Save As menu item.
2. Down in the Save as Type list box, select Rich Text Format.
3. Save the file.
In Word 2007:
1. Click the round Office button in the upper-left corner of the window.
2. Click Save As-%26gt; Other formats.
3. Continue as in Step 2, above.
Hope that helps.How to change a file to rich text format on Microsoft word processor?Go to the top left where it says File and left click... go to Save As and then when the dialog box pops up name the file and then right below it you will be able to select the file type. You will be able to save it as a RTF file.
Be warned that you could change the formatting when doing this.How to change a file to rich text format on Microsoft word processor?Run MS Word.
Open your RTF document in MS Word.
Click on the %26quot;File%26quot; menu.
Choose %26quot;Save As...%26quot; and make sure that %26quot;Word Document%26quot; is selected in the %26quot;Save as type%26quot; box.
Save As... Word Document
Enter the file name you wish or leave it as it is. This will keep the
same name as your RTF document, but convert it to Word-format.
Click %26quot;Save%26quot;.
source:
http://www.wikihow.com/Convert-an-RTF-File-into-MS-Word-DocumentHow to change a file to rich text format on Microsoft word processor?in ms word, you have option as save as in that you can save it in rich text format
How can I fix my system performance?
I have an IDE HDD with Windows XP SP3. I just bought another motherboard and another processor. I changed from: ASRock P4VM8/Pentium 4 to Intel MOBO/Intel Core 2 Duo. All my Linux OS installed are running really fast, but Windows is running extremely slow and it's getting weird. The USB optical mouse stops working and stays in a fixed position of the screen. The Realtek drivers are installed for Audio device, but my system is running without sound (Linux has pretty good sound). I wonder if there's an OS setting that its keeping my system %26quot;tied%26quot; to old MOBO/processor values. How can I fix this without reinstalling Windows XP OS?How can I fix my system performance?You are probably luck the thing is running at all without reinstalling Windows. You really need to reinstall in order for Windows to get the proper drivers setup and then you need to install the chip set drivers and other support from the Intel CD that came with your motherboard. Good LuckHow can I fix my system performance?How to replace the motherboard on a computer that is running Windows XP:
http://support.microsoft.com/kb/824125How can I fix my system performance?its slow cz when you first installed it the setup only loaded the thing to run the P4 run smooth and it didn't load the drivers to make the c2d run smooth so you have to reformat itHow can I fix my system performance?Well you HAVE TO reformat it. Or try at least an error fix by clicking properties on your windows drive and start error fix.
http://support.microsoft.com/kb/824125How can I fix my system performance?its slow cz when you first installed it the setup only loaded the thing to run the P4 run smooth and it didn't load the drivers to make the c2d run smooth so you have to reformat itHow can I fix my system performance?Well you HAVE TO reformat it. Or try at least an error fix by clicking properties on your windows drive and start error fix.
Pc with Intel DP45SG board wont boot up.?
I have an Intel DP45SG Motherboard in my custom pc and it wont boot up. Lights and fan are on but that is as far as I can get, no video signal. I think it has something to do with resetting the CMOS or BIOS. I am wondering if anyone has any idea on the correct procedure for resetting the CMOS for the above Motherboard. It booted up fine before, but then I changed the processor voltage, and am trying to figure out how to reset it.Pc with Intel DP45SG board wont boot up.?look at your mother board it should have a reset swichPc with Intel DP45SG board wont boot up.?Boot into the BIOS, hit delete on start-up. And reset the default settings, close and save changes.
Good Luck. %26quot;El Padrino%26quot;.Pc with Intel DP45SG board wont boot up.?Pull the CMOS battery out with the system off. Keep it out for around 30 seconds. Replace it and as long as you did not fry something, it should set the BIOS to the default settings.Pc with Intel DP45SG board wont boot up.?Pull your cmos battery out and it will reset and then try again if not then you might have fried something hard to say without knowing everything you have done to it.
Good Luck. %26quot;El Padrino%26quot;.Pc with Intel DP45SG board wont boot up.?Pull the CMOS battery out with the system off. Keep it out for around 30 seconds. Replace it and as long as you did not fry something, it should set the BIOS to the default settings.Pc with Intel DP45SG board wont boot up.?Pull your cmos battery out and it will reset and then try again if not then you might have fried something hard to say without knowing everything you have done to it.
I'm Doing a project on "Computer Hardware", what should I add and which should i talk about first?
I'm trying to talk about
[How to upgrade you're PC, like changing Rams, Processor, adding Video Cards, AGP cards, Sound Cards,]
[The difference between LCD Monitors and ol' Fat monitor]
[Input and Outpud Devices- Keyboard, speakers, scanners, printers]
[Primary Storage and Secondary Storage] -is CD Drive a primary storage? I'm not sure about that
So the bottom line is that I think there's sumthing missing, wat else should i talk about? and what should i talk about first then at last...
ThxI'm Doing a project on %26quot;Computer Hardware%26quot;, what should I add and which should i talk about first?hard drive? you should always start talking about the motherboard then go to cpu then ram hard drive then go from thereI'm Doing a project on %26quot;Computer Hardware%26quot;, what should I add and which should i talk about first?Modems, dial up vs DSL, cable.
Depending on how involved your project is, include the history of computers. The first computer, how fast it was, how big, and compare it to today.
Also, back in the day, before the Internet was big, people used to exchange information via BBS, Bulletin board systems.
BTW, a cd drive is not primary storage, your hard drive is the primary. A CD writer could be a back up.
Don't forget tape back-up systems.
You should also include 5 1/4 and 3 1/2 floppies. And, you could compare the size of a modern day 200 Gig drive to a few years ago, then the 1 gig first came out, they were pretty big.
You could go on and on, but hopefully this will give you some ideas.I'm Doing a project on %26quot;Computer Hardware%26quot;, what should I add and which should i talk about first?How about speculating on the future? The hard drive is the last mechanical device left and is the major bottleneck right now. What will replace it? They've been experimenting with biological processors, using living cells rather than switching transistors in CPU's. The list is endless. It boggles the mind to think what a computer might be like 20 years from now.I'm Doing a project on %26quot;Computer Hardware%26quot;, what should I add and which should i talk about first?Nobody is really using AGP anymore. You could talk about the different between AGP and PCIe the new graphic card standared.
Some interesting stuff is really about Buss speed, and how that effects the overall performance of a computer. (I mean if you have a Processor running at 2.4 ghz but a Bus speed running at only 800 Mhz things start to slow down.
Also in on my computer classes the teacher went through how really Hard drives slow the computer down. I don't remember all the math, but the teacher converted everything to like seconds. (so a processor does so many calculations a second) and then converted the seek time on a hard drive to seconds. and it came down to that as your Processor is waiting for the hard drive to seek it ends up being like 2 days later. Something strange like that it was way interesting. (this was on older IDE hard drives, not the new SATA drives).
[How to upgrade you're PC, like changing Rams, Processor, adding Video Cards, AGP cards, Sound Cards,]
[The difference between LCD Monitors and ol' Fat monitor]
[Input and Outpud Devices- Keyboard, speakers, scanners, printers]
[Primary Storage and Secondary Storage] -is CD Drive a primary storage? I'm not sure about that
So the bottom line is that I think there's sumthing missing, wat else should i talk about? and what should i talk about first then at last...
ThxI'm Doing a project on %26quot;Computer Hardware%26quot;, what should I add and which should i talk about first?hard drive? you should always start talking about the motherboard then go to cpu then ram hard drive then go from thereI'm Doing a project on %26quot;Computer Hardware%26quot;, what should I add and which should i talk about first?Modems, dial up vs DSL, cable.
Depending on how involved your project is, include the history of computers. The first computer, how fast it was, how big, and compare it to today.
Also, back in the day, before the Internet was big, people used to exchange information via BBS, Bulletin board systems.
BTW, a cd drive is not primary storage, your hard drive is the primary. A CD writer could be a back up.
Don't forget tape back-up systems.
You should also include 5 1/4 and 3 1/2 floppies. And, you could compare the size of a modern day 200 Gig drive to a few years ago, then the 1 gig first came out, they were pretty big.
You could go on and on, but hopefully this will give you some ideas.I'm Doing a project on %26quot;Computer Hardware%26quot;, what should I add and which should i talk about first?How about speculating on the future? The hard drive is the last mechanical device left and is the major bottleneck right now. What will replace it? They've been experimenting with biological processors, using living cells rather than switching transistors in CPU's. The list is endless. It boggles the mind to think what a computer might be like 20 years from now.I'm Doing a project on %26quot;Computer Hardware%26quot;, what should I add and which should i talk about first?Nobody is really using AGP anymore. You could talk about the different between AGP and PCIe the new graphic card standared.
Some interesting stuff is really about Buss speed, and how that effects the overall performance of a computer. (I mean if you have a Processor running at 2.4 ghz but a Bus speed running at only 800 Mhz things start to slow down.
Also in on my computer classes the teacher went through how really Hard drives slow the computer down. I don't remember all the math, but the teacher converted everything to like seconds. (so a processor does so many calculations a second) and then converted the seek time on a hard drive to seconds. and it came down to that as your Processor is waiting for the hard drive to seek it ends up being like 2 days later. Something strange like that it was way interesting. (this was on older IDE hard drives, not the new SATA drives).
Help Upgrading my Computer?
hey guys, so first let me say a lot of thanks to whoever will take the time to help me out with this :-)
so the reason i wanna upgrade it is because i'm starting school soon, and i will study things that a good home computer will be necessary to run. i'll have to work with Avid express Pro, and edit videos, also alot of photoshop and probebly indesign. maybe after effects too, and titles. other than that i'm gonna probebly work with music editing/producing, but that's less important right now..
so, here's what i have -
processor: intel 2 duo E6400, 2.13ghz clock, 1066mhz side bus, s775 2MB(L2) cache
motherboard: gigabyte 965P-DS4 s775 conroe, DDRii800, 2xpcie-e
Ram: two - ddr11667 512 kingston
video card: sapphire X1650 pro 512mb DDRii, TV, DVI, PCI-E
hard drives: very nice WD 160gb, and external mybook WD 1000gb(with firewire)
that's the important things i guess. now, from my understing, i don't need a very good video card to work on editing, and i think what i have isn't bad and should be enough(am i right about it?) now since changing the processor is a big deal, i guess my best would be on getting better and more ram, the question is how much? and what kind?
anyways, so if you have the patience and kindness to help me out here i would really appriciate it, i know it's a long thread and all, but it's just that i vaguely have any clue about these stuff, so i figured nothing can be wrong in asking. so thanks in advance :-)Help Upgrading my Computer?Since you will be using this for school work, and probably not gaming, you wouldn't get a Dual Core. Quad core provides the highest performance for multi-tasking, and running programs, dual core for gaming.
I would suggest for the CPU: Intel Quad Core 2.66GHZ Q9450. It is priced at around $300 (http://www.newegg.com/Product/Product.as
If it is out of your budget, the next best thing would be to get a Intel Quad Core 2.4GHZ Q6600. This will cost you at around $180 (http://www.newegg.com/Product/Product.as
----
That's CPU out of the way, since you will be using quite a few programs, of course you will need some more RAM.
I suggest a Kingston 2GB DDR2 (2x1GB). 2GB should be enough, and you can also use your 2x 512MB RAM Sticks along with the 2GB RAM as well if you have enough PCI slots.
http://www.newegg.com/Product/Product.as
---
I have also checked if your motherboard is compatible with the hardware I have stated above, and it is. The Video Card seems decent, since you won't be doing much gaming or 3D rendering.
You have enough Hard Drive space, thanks to your external hard drive. Tip: Don't store data that you will use often on your external, external hard drive has slower read/write speed so it will take longer to read/write files and applications. So store the data you use most on your internal, and the data which is not viewed or used often on your external.
For the CPU and RAM upgrade, it will only cost you around $400. (Newegg prices).
Note: Newegg is for USA only.
I hope I have helped. Good luck with schooling!
---
Some useful sites you can look at on how to install RAM and CPU. Might come in handy when you decide to upgrade.
http://www.ehow.com/how_895_install-ram.
(RAM)
http://www.pcmech.com/byopc/step-1-mater
(CPU)
The installation manual will probably provide the best instructions, so when buying the part, and your about to install, a good flick through the installation manual is a good idea. If it doesn't give you enough information about installing, look at the sites. Last thing if none of the sites help, post up on here again.Help Upgrading my Computer?take it 2 da shop Help Upgrading my Computer?Depending on your operating system, you should take perhaps 4 GB RAM.Help Upgrading my Computer?i would go for 2 gig of ram Help Upgrading my Computer?
Hi,
If I were you,I would just upgrade my RAM to 3-4GB(XP wont detect the entire 4GB).After looking at configuration,I dont think anything else needs to be upgraded.In case you are consider changing the video card,it will be better after you start working with the applications that you mentioned and if it shows any issues.
Regards
SlashHow to make a baby quilt service pin for my computer
so the reason i wanna upgrade it is because i'm starting school soon, and i will study things that a good home computer will be necessary to run. i'll have to work with Avid express Pro, and edit videos, also alot of photoshop and probebly indesign. maybe after effects too, and titles. other than that i'm gonna probebly work with music editing/producing, but that's less important right now..
so, here's what i have -
processor: intel 2 duo E6400, 2.13ghz clock, 1066mhz side bus, s775 2MB(L2) cache
motherboard: gigabyte 965P-DS4 s775 conroe, DDRii800, 2xpcie-e
Ram: two - ddr11667 512 kingston
video card: sapphire X1650 pro 512mb DDRii, TV, DVI, PCI-E
hard drives: very nice WD 160gb, and external mybook WD 1000gb(with firewire)
that's the important things i guess. now, from my understing, i don't need a very good video card to work on editing, and i think what i have isn't bad and should be enough(am i right about it?) now since changing the processor is a big deal, i guess my best would be on getting better and more ram, the question is how much? and what kind?
anyways, so if you have the patience and kindness to help me out here i would really appriciate it, i know it's a long thread and all, but it's just that i vaguely have any clue about these stuff, so i figured nothing can be wrong in asking. so thanks in advance :-)Help Upgrading my Computer?Since you will be using this for school work, and probably not gaming, you wouldn't get a Dual Core. Quad core provides the highest performance for multi-tasking, and running programs, dual core for gaming.
I would suggest for the CPU: Intel Quad Core 2.66GHZ Q9450. It is priced at around $300 (http://www.newegg.com/Product/Product.as
If it is out of your budget, the next best thing would be to get a Intel Quad Core 2.4GHZ Q6600. This will cost you at around $180 (http://www.newegg.com/Product/Product.as
----
That's CPU out of the way, since you will be using quite a few programs, of course you will need some more RAM.
I suggest a Kingston 2GB DDR2 (2x1GB). 2GB should be enough, and you can also use your 2x 512MB RAM Sticks along with the 2GB RAM as well if you have enough PCI slots.
http://www.newegg.com/Product/Product.as
---
I have also checked if your motherboard is compatible with the hardware I have stated above, and it is. The Video Card seems decent, since you won't be doing much gaming or 3D rendering.
You have enough Hard Drive space, thanks to your external hard drive. Tip: Don't store data that you will use often on your external, external hard drive has slower read/write speed so it will take longer to read/write files and applications. So store the data you use most on your internal, and the data which is not viewed or used often on your external.
For the CPU and RAM upgrade, it will only cost you around $400. (Newegg prices).
Note: Newegg is for USA only.
I hope I have helped. Good luck with schooling!
---
Some useful sites you can look at on how to install RAM and CPU. Might come in handy when you decide to upgrade.
http://www.ehow.com/how_895_install-ram.
(RAM)
http://www.pcmech.com/byopc/step-1-mater
(CPU)
The installation manual will probably provide the best instructions, so when buying the part, and your about to install, a good flick through the installation manual is a good idea. If it doesn't give you enough information about installing, look at the sites. Last thing if none of the sites help, post up on here again.Help Upgrading my Computer?take it 2 da shop Help Upgrading my Computer?Depending on your operating system, you should take perhaps 4 GB RAM.Help Upgrading my Computer?i would go for 2 gig of ram Help Upgrading my Computer?
Hi,
If I were you,I would just upgrade my RAM to 3-4GB(XP wont detect the entire 4GB).After looking at configuration,I dont think anything else needs to be upgraded.In case you are consider changing the video card,it will be better after you start working with the applications that you mentioned and if it shows any issues.
Regards
Slash
How do I build a good budget gaming computer?
I plan to build a gaming computer for the first time but I don't know where to start. My budget will be about $1200 and I really want to get the best bang for my buck, with good upgradability and able to play the latest games with relative ease. I was think about getting an i7 processor but when I looked on wikipedia (Generally not the best place for information, I know.) it listed a few different versions of the exact same processor, but released at different times. Is that kind of like what they did with the XBox 360 where they changed the processor around slightly on the newer models but it's still basically the same? I'm getting off track now but the basic question is what should I look for without breaking the bank?How do I build a good budget gaming computer?Check out http://www.gamingbuilds.com/
There is an awesome picture guide on the homepage if you are a beginner. It shows exactly how to build a computer, step by step. Highly recommended.
The website also offers computer build ideas, which sounds like it would come in handy for you. Honestly, the processor will not make that much of a difference on a gaming build. I would check out the $700 build on that website and just choose a more expensive video card if you want to spend more.How do I build a good budget gaming computer?Case-wise, I'd suggest the Antec 1200. Plenty of space for everything you'd want to put in there. Harddrive suggestion: Western Digital Caviar Black WD6401AALS 640GB 7200 RPM SATA 3.0Gb/s 3.5%26quot; Internal Hard Drive -Bare Drive I have two running in Raid 0 and my comp is running very quickly.How do I build a good budget gaming computer?You should probably read some reviews for the components you are considering using, and look for sites that provide clear and unbiased reviews. You could google for things like %26quot;i7 processor reviews%26quot;, %26quot;i7motherboard reviews%26quot;, etc.
THe overclockers sites and their forums are usually a good source for reviews because they want the best parts to overclock the hell out of and still remain stable and don't cost a lot.
Here are a few links. There are many more.
If you go to the intel site you can find lot of info about the i7 cpu and how the various releases are different. It is worth browsing the site.
Good luck
There is an awesome picture guide on the homepage if you are a beginner. It shows exactly how to build a computer, step by step. Highly recommended.
The website also offers computer build ideas, which sounds like it would come in handy for you. Honestly, the processor will not make that much of a difference on a gaming build. I would check out the $700 build on that website and just choose a more expensive video card if you want to spend more.How do I build a good budget gaming computer?Case-wise, I'd suggest the Antec 1200. Plenty of space for everything you'd want to put in there. Harddrive suggestion: Western Digital Caviar Black WD6401AALS 640GB 7200 RPM SATA 3.0Gb/s 3.5%26quot; Internal Hard Drive -Bare Drive I have two running in Raid 0 and my comp is running very quickly.How do I build a good budget gaming computer?You should probably read some reviews for the components you are considering using, and look for sites that provide clear and unbiased reviews. You could google for things like %26quot;i7 processor reviews%26quot;, %26quot;i7motherboard reviews%26quot;, etc.
THe overclockers sites and their forums are usually a good source for reviews because they want the best parts to overclock the hell out of and still remain stable and don't cost a lot.
Here are a few links. There are many more.
If you go to the intel site you can find lot of info about the i7 cpu and how the various releases are different. It is worth browsing the site.
Good luck
Need Computer Upgrading Help?
I have a eMachines T3104
here are the specs:
http://reviews.cnet.com/desktops/emachines-t3104/4507-3118_7-31556256.html
except i upgraded the Ram to 2g (max), added a 256mb video card, changed the hard drive, and i have a new sound card coming in
i need help changing the processor, i don't really like the weak 1.8ghz, what type of processor should i put in to make it the best it can be
also, i should probably switch the fans, but i need help to pick one...
please if anybody can put a good opinion on how to make my computer the best as it could be, without replacing the motherboard.Need Computer Upgrading Help?max ram is 2x1gb@333mhz speed, cpu was +3700 athlon. socket 754
http://www.pcprogress.com/product.asp?m1
3400 for $82, but you gotta buy fan? lol
you can find em on ebay, and 3200 seems to be the popular choice
http://shop.ebay.com/items/__754-process
Im sure you can get fan/heatsink from newegg, and thernal paste if needed. maybe a case fan.Need Computer Upgrading Help?You need to know some things about your motherboard which is not listed in the link provided. What is the motherboard? What is the CPU socket? What is the front side buss? What is the max mHz of the motherboard? Unless you find someone who has done what you wish to do, you are going to have to look else where for the answers.
here are the specs:
http://reviews.cnet.com/desktops/emachines-t3104/4507-3118_7-31556256.html
except i upgraded the Ram to 2g (max), added a 256mb video card, changed the hard drive, and i have a new sound card coming in
i need help changing the processor, i don't really like the weak 1.8ghz, what type of processor should i put in to make it the best it can be
also, i should probably switch the fans, but i need help to pick one...
please if anybody can put a good opinion on how to make my computer the best as it could be, without replacing the motherboard.Need Computer Upgrading Help?max ram is 2x1gb@333mhz speed, cpu was +3700 athlon. socket 754
http://www.pcprogress.com/product.asp?m1
3400 for $82, but you gotta buy fan? lol
you can find em on ebay, and 3200 seems to be the popular choice
http://shop.ebay.com/items/__754-process
Im sure you can get fan/heatsink from newegg, and thernal paste if needed. maybe a case fan.Need Computer Upgrading Help?You need to know some things about your motherboard which is not listed in the link provided. What is the motherboard? What is the CPU socket? What is the front side buss? What is the max mHz of the motherboard? Unless you find someone who has done what you wish to do, you are going to have to look else where for the answers.
How can i change a letter written in word processor in to PDFformat?
The easiest way to generate .pdf from a Word document is to get PDFCreator (http://sourceforge.net/projects/pdfcreat and install it. It is free and works great. I use it create all of my .pdf files.
It will add a %26quot;printer%26quot; to your Windows computer. To generate the .pdf file, just %26quot;print%26quot; to the PDFCreator print device and it will generate the file.How can i change a letter written in word processor in to PDFformat?easiest way - pdf creator - works like a printer, 'prints' to a pdf file (free software)
search for pdfcreatorHow can i change a letter written in word processor in to PDFformat?PDFcreator, free from:How can i change a letter written in word processor in to PDFformat?The easiest way I have found to change anything on your computer screen into a PDF, use a program called SnagIT. You can copy anything on your computer screen and save it in many types of files....even PDF. Hope this helps. http://www.techsmith.com/
It will add a %26quot;printer%26quot; to your Windows computer. To generate the .pdf file, just %26quot;print%26quot; to the PDFCreator print device and it will generate the file.How can i change a letter written in word processor in to PDFformat?easiest way - pdf creator - works like a printer, 'prints' to a pdf file (free software)
search for pdfcreatorHow can i change a letter written in word processor in to PDFformat?PDFcreator, free from:How can i change a letter written in word processor in to PDFformat?The easiest way I have found to change anything on your computer screen into a PDF, use a program called SnagIT. You can copy anything on your computer screen and save it in many types of files....even PDF. Hope this helps. http://www.techsmith.com/
Computer Problem Part 4 - Almost worked!?
Ok, so here's where I have left off from.
I had a computer problem only a few days ago, and I (well, the Yahoo! Community did...) solved the problem by changing the PSU. I had a 450W in, but I replaced it with a 250W and Kapow! it fires into life!
I managed to reformat the HDD I had in (80GB) and after installation, put in a 200GB HDD as a slave. It worked fine, and I started installing all my old programs and stuff, chuffed that I have my old desktop back working.
I turn it off at 2am, and once I got back from work at 12.15pm the following day, I pushed the power button and nothing happened. I couldn't believe it!
I thought that the PSU had blown, so I went and replaced it with a 230W PSU... but nothing has happened. I know its not the PSU because there is a green light that glows when power is getting to it, and come on, it was working yesterday! And I know its not the actual power switch, because I thought it was that yesterday, but I changed it and it never solved the problem, so when I changed the PSU and put the old one back in, it turned on. Its a new Graphics card (less powerful, but now the graphics actually work...) that's in it, a new P4 2.4Ghz CPU, new Abit BE7 motherboard, a formatted HDD and a now formatted slave HDD. This is the 3rd PSU I have put in it, but as you can tell I don't think there was anything wrong with the old PSU... I just can't put my finger on what has went wrong, as nobody has touched this presumably fine working PC.
Please note that I have scrapped the 450W as it was the problem before. I still have the 250W and I currently have the 230W installed. I have tried turning it off and disconnecting from the power source for a while.
UPDATE
I have taken the advice from part 2 of this problem that the Yahoo! Community have given me, and instead of going down in power, I have went up to 400W power supply, as I went on a website and it says that my computer needs 271W of power. I borrowed a 400W PSU and threw it in. Result? Still doesn't work.
I went and changed the CPU from a Pentium 4 2.4GHz processor to an Intel Celeron 2.4GHz processor thinking that possibly the processor has fried... which I doubt because it was working fine one night, 10 hours later when off it doesn't!!!
Does anyone know whats went wrong here? I don't think its PSU problems, I dont think there's Processor problems. Im getting really frustrated and just want this god damn thing to work! Someone once suggested that maybe my power surge has blown it up, which got me thinking, because when I got a power cut a few times, the comp stopped working ,and what I used to do was disconnect the power for 20 mins and reconnect, and it would work. But the thing is, there was no power cut. I know this because I would have had to reset my alarm which I hate doing, and I never had to.
The person who gives me the correct answer that sorts it gets a thumbs up and 10 points.
Thank you!
%26gt;%26gt; UPDATE %26gt;%26gt;
I have rebuilt this computer 3 times today in the hope that it would work. I have changed the Processor to an Intel Celeron (one I seen working) thinking it was the processor, and was starting to get frustrated and started looking at new motherboards on eBay to help solve this problem. I then started looking at the pins that operate the power switches and went on the manual to look and see if they were on the right way. According to a guide on-line, the coloured one indicates a positive, and the black/white one is a negative. Anyway, I clicked a few pages ahead on the Adobe manual and seen how to clear the CMOS, and I thought %26quot;hey, the comps not coming on, but I'll check anyway%26quot; and low and behold, I think I have found the problem!
The original jumper that was located there was missing. the CMOS wasn't being activated! So I ran to my friends house and basically tore their spare AMD computer and took a jumper from it. I went home and fitted it onto the CMOS and the %26quot;vvVVV...%26quot; of the fans kick in, the LED's light up... I thought %26quot;oh YES!!!%26quot; and then %26quot;VVVvv...%26quot; shut down. I try again and the same happens. I get about one second of activation and then it dies. But at least I knew it wasn't a power issue! My guess is I must have knocked it out when I put in the new graphics card.
Does anyone know what I should do to get it running... say... a good few years? Does anyone know if a CMOS jumper is different from a HDD jumper? I wouldn't imagine it was, but if it is, then I don't know what to do. Or is it the new Processor I put in that's causing the shut down?
Anyone with the correct answer and allows this machine to run gets 10 points!Computer Problem Part 4 - Almost worked!?sigh....
im guessing it's one of your software thats screwing the computer up...
try reusing the 450 psu
and this time
put ur comp and stand -by or hibernate if it survives
------------------------------
unless you actually wiped the HD again and used the same parts as it came from your %26quot;original build%26quot;(if you cant use the original build try finding differnt parts)
------------------------------
it COULD be your MotherBoardComputer Problem Part 4 - Almost worked!?I have seen this happen when (believe it or not) the CMOS battery dies. Only certain machines WON'T POST without a battery (or a dead one) but it DOES happen.
The jumper does not differentiate between HDD and Motherboard jumpers, they are all the same. The new proc COULD be a culprit as well, if the procs are bad, fans may power up, lights may light, but it won't post. Try swapping the CPU out, but check that CMOS battery first.
I had a computer problem only a few days ago, and I (well, the Yahoo! Community did...) solved the problem by changing the PSU. I had a 450W in, but I replaced it with a 250W and Kapow! it fires into life!
I managed to reformat the HDD I had in (80GB) and after installation, put in a 200GB HDD as a slave. It worked fine, and I started installing all my old programs and stuff, chuffed that I have my old desktop back working.
I turn it off at 2am, and once I got back from work at 12.15pm the following day, I pushed the power button and nothing happened. I couldn't believe it!
I thought that the PSU had blown, so I went and replaced it with a 230W PSU... but nothing has happened. I know its not the PSU because there is a green light that glows when power is getting to it, and come on, it was working yesterday! And I know its not the actual power switch, because I thought it was that yesterday, but I changed it and it never solved the problem, so when I changed the PSU and put the old one back in, it turned on. Its a new Graphics card (less powerful, but now the graphics actually work...) that's in it, a new P4 2.4Ghz CPU, new Abit BE7 motherboard, a formatted HDD and a now formatted slave HDD. This is the 3rd PSU I have put in it, but as you can tell I don't think there was anything wrong with the old PSU... I just can't put my finger on what has went wrong, as nobody has touched this presumably fine working PC.
Please note that I have scrapped the 450W as it was the problem before. I still have the 250W and I currently have the 230W installed. I have tried turning it off and disconnecting from the power source for a while.
UPDATE
I have taken the advice from part 2 of this problem that the Yahoo! Community have given me, and instead of going down in power, I have went up to 400W power supply, as I went on a website and it says that my computer needs 271W of power. I borrowed a 400W PSU and threw it in. Result? Still doesn't work.
I went and changed the CPU from a Pentium 4 2.4GHz processor to an Intel Celeron 2.4GHz processor thinking that possibly the processor has fried... which I doubt because it was working fine one night, 10 hours later when off it doesn't!!!
Does anyone know whats went wrong here? I don't think its PSU problems, I dont think there's Processor problems. Im getting really frustrated and just want this god damn thing to work! Someone once suggested that maybe my power surge has blown it up, which got me thinking, because when I got a power cut a few times, the comp stopped working ,and what I used to do was disconnect the power for 20 mins and reconnect, and it would work. But the thing is, there was no power cut. I know this because I would have had to reset my alarm which I hate doing, and I never had to.
The person who gives me the correct answer that sorts it gets a thumbs up and 10 points.
Thank you!
%26gt;%26gt; UPDATE %26gt;%26gt;
I have rebuilt this computer 3 times today in the hope that it would work. I have changed the Processor to an Intel Celeron (one I seen working) thinking it was the processor, and was starting to get frustrated and started looking at new motherboards on eBay to help solve this problem. I then started looking at the pins that operate the power switches and went on the manual to look and see if they were on the right way. According to a guide on-line, the coloured one indicates a positive, and the black/white one is a negative. Anyway, I clicked a few pages ahead on the Adobe manual and seen how to clear the CMOS, and I thought %26quot;hey, the comps not coming on, but I'll check anyway%26quot; and low and behold, I think I have found the problem!
The original jumper that was located there was missing. the CMOS wasn't being activated! So I ran to my friends house and basically tore their spare AMD computer and took a jumper from it. I went home and fitted it onto the CMOS and the %26quot;vvVVV...%26quot; of the fans kick in, the LED's light up... I thought %26quot;oh YES!!!%26quot; and then %26quot;VVVvv...%26quot; shut down. I try again and the same happens. I get about one second of activation and then it dies. But at least I knew it wasn't a power issue! My guess is I must have knocked it out when I put in the new graphics card.
Does anyone know what I should do to get it running... say... a good few years? Does anyone know if a CMOS jumper is different from a HDD jumper? I wouldn't imagine it was, but if it is, then I don't know what to do. Or is it the new Processor I put in that's causing the shut down?
Anyone with the correct answer and allows this machine to run gets 10 points!Computer Problem Part 4 - Almost worked!?sigh....
im guessing it's one of your software thats screwing the computer up...
try reusing the 450 psu
and this time
put ur comp and stand -by or hibernate if it survives
------------------------------
unless you actually wiped the HD again and used the same parts as it came from your %26quot;original build%26quot;(if you cant use the original build try finding differnt parts)
------------------------------
it COULD be your MotherBoardComputer Problem Part 4 - Almost worked!?I have seen this happen when (believe it or not) the CMOS battery dies. Only certain machines WON'T POST without a battery (or a dead one) but it DOES happen.
The jumper does not differentiate between HDD and Motherboard jumpers, they are all the same. The new proc COULD be a culprit as well, if the procs are bad, fans may power up, lights may light, but it won't post. Try swapping the CPU out, but check that CMOS battery first.
How do I change the default font on MS Works Word Processor?
I'm using Vista, and the default font size is 10. I always want it to be 12.How do I change the default font on MS Works Word Processor?Open a new document and without typing anything on the page, change the 'Font Size' to 12. Click on the 'File' menu and choose 'Save As'. In the bottom right corner click on the 'Template' button. In the 'Save As Template' dialogue box type a name for your template and place a tick mark in front of 'Use this template for new Word Processor documents' and click OK.graphics animation software
How can I change the page height on Microsoft Works Word Processor?
I'm righting an essay for a class but it is supposed to be 9 and a half inches in height and 6 and a half in width I know how to change the width you just drag the little arrow things on top but how do you change the height?How can I change the page height on Microsoft Works Word Processor?Look at those numbers: 9 1/2 x 6 1/2. Now, wouldn't they fit just right on an ordinary 8 1/2 x 11 sheet of paper turned sideways?
Here's how to turn your page sideways (Landscape orientation) in Works Word Processor:
1. Click the File-%26gt;Page Setup menu item.
2. Click the Source, Size and Orientation tab.
3. Click the Landscape radio button.
4. You might have to alter the margins on the Margins tab somewhat.
5. Click OK.
Hope that helps.
Here's how to turn your page sideways (Landscape orientation) in Works Word Processor:
1. Click the File-%26gt;Page Setup menu item.
2. Click the Source, Size and Orientation tab.
3. Click the Landscape radio button.
4. You might have to alter the margins on the Margins tab somewhat.
5. Click OK.
Hope that helps.
How do you upgrade a processor in vista.?
I mean how do you actually change it. I have the processor I want, but I don't know exactly how to change it. Do I just take out the old one and plug the other one in? Or is it not as simple as that?How do you upgrade a processor in vista.?In thory it is as simple as taking out hte old one n pluggin in the new one.
just make sure its the right type, and you plug it in teh right way ( I know hter ekinks in the Intel CPU's so it shoudl be hard to stick it in teh wrong way. rmeber to stick on some themral grease too.
The problme iswinows OS kick up a fuss if htiere is a drastic change to the PC, however this is mainly swappoing oou a hold MoBo, so it shoudlnt be too much ofa fuss to be prepared to have to re-install Visat (I.E Back up)How do you upgrade a processor in vista.?You must close computer, open case, remove processor heatsink, unplug old processor, plug new processor, remove old thermal compound from heatsink, apply thermal compound (to processor not heatsink) and put heatsink back.
I guess you don't have thermal compound in home. Buy arctic mx2 from computer store.
just make sure its the right type, and you plug it in teh right way ( I know hter ekinks in the Intel CPU's so it shoudl be hard to stick it in teh wrong way. rmeber to stick on some themral grease too.
The problme iswinows OS kick up a fuss if htiere is a drastic change to the PC, however this is mainly swappoing oou a hold MoBo, so it shoudlnt be too much ofa fuss to be prepared to have to re-install Visat (I.E Back up)How do you upgrade a processor in vista.?You must close computer, open case, remove processor heatsink, unplug old processor, plug new processor, remove old thermal compound from heatsink, apply thermal compound (to processor not heatsink) and put heatsink back.
I guess you don't have thermal compound in home. Buy arctic mx2 from computer store.
Changing voltage on processor??
I currently have a AMD Dual Core 5600+ 64 X2 Socket AM2 processor. The normal clock is 2.6GHZ. I was able to overclock it to 3.00GHZ just by changing the FSB. but it is unstable if I go any higher, but the chip still remains below 50C so I was wondering how I would increase to voltage to the chip in order to push it even further (since I heard that helps stability at higher clocks) but my motherboard is a MSI K9N I believe, but I have 2 computers I am trying to overclock, but none of the motherboards have the option to increase to processor's voltage, I can only increase the voltage of the RAM on one of the motherboards. can anybody help tell me how I might get a aftermarket bios or a freeware program for windows so I can raise the voltage much higher? I tried a AMD clock program but would not let me increase the voltage anymore than .5Vs higher than what it was already set at.
Please help me! I want to break my overclocking record with this dual core chip lol, ive never got 3.2GHZ+Changing voltage on processor??update the bios on the boards, or get a proper overclocking board from gigabyte.Changing voltage on processor??DUDE?! You raised the voltage by .5v?! That's almost a 50% increase in voltage! That's WAY too much. Usually you want to raise it by .01-.02v at a time until it's stable.
What are you trying to do? Fry the CPU?Changing voltage on processor??Hey, if you are unable to change the core voltage in your BIOS, try updating your BIOS from the manfacturers website, this may solve your problem, if not, you will have to replace your board with another one capable of a good overclocking ability, able to change v cores, frequency, ram timing etc. hope this helps.Changing voltage on processor??Too much voltage can damage a component but the right amount can help stability. In regards to your processor, raising the voltage with overclocking will bring stability but can also raise temps. I typically recommend not going over 1.45volts with air cooling setups. High voltages over time can cause electromigration but we're talking like 1.5-1.6+ volts 24/7.
Just make your best judgment and when you start to see the temperatures rise, drop the voltages and keep testing.Changing voltage on processor??No more man! youre right on your way to frying your processor.
Please help me! I want to break my overclocking record with this dual core chip lol, ive never got 3.2GHZ+Changing voltage on processor??update the bios on the boards, or get a proper overclocking board from gigabyte.Changing voltage on processor??DUDE?! You raised the voltage by .5v?! That's almost a 50% increase in voltage! That's WAY too much. Usually you want to raise it by .01-.02v at a time until it's stable.
What are you trying to do? Fry the CPU?Changing voltage on processor??Hey, if you are unable to change the core voltage in your BIOS, try updating your BIOS from the manfacturers website, this may solve your problem, if not, you will have to replace your board with another one capable of a good overclocking ability, able to change v cores, frequency, ram timing etc. hope this helps.Changing voltage on processor??Too much voltage can damage a component but the right amount can help stability. In regards to your processor, raising the voltage with overclocking will bring stability but can also raise temps. I typically recommend not going over 1.45volts with air cooling setups. High voltages over time can cause electromigration but we're talking like 1.5-1.6+ volts 24/7.
Just make your best judgment and when you start to see the temperatures rise, drop the voltages and keep testing.Changing voltage on processor??No more man! youre right on your way to frying your processor.
How can I slow down or control the processor speed on my lap top?
I Know most people are trying to find ways to speed their computer up but not me. I Have a P4 processor 3.2 GHZ installed within my laptop (dont ask me why) but the result is my laptop overheats so quickly I can not use it long enough to do what I want.
I read somewhere that you could change the settings of your processor so it runs at a lower speed. Any one know how this is or can be done?How can I slow down or control the processor speed on my lap top?I don't think you can slow down the processor speed enough to get it to run cooler. Why is your processor running so hot? You should keep the fans clear of everything, IE. don't put your laptop on a bed or surrounded by blankets.. this will get the laptop some room to disperse the heat and won't freeze up or crash.
You get special stands with fans on them where you can put the laptop on .. and they will help cool the thing down.
If nothing helps, take it back to the store and ask them to look at it. You might need more heat conductor gel or have them put the cpu heatsink back on it properly.How can I slow down or control the processor speed on my lap top?Sounds like you have a desktop chip in there ;) I'd swing by the BIOS when it starts up and see if you can lower the Front-side Bus to CPU multiplier.How can I slow down or control the processor speed on my lap top?You might have room for manouevre with Notebook Hardware Control (requires .netframework 2.0)
http://www.pbus-167.com/nhc/nhc.htm#anchHow can I slow down or control the processor speed on my lap top?I cant speak for other laptops, but on my Toshiba, I have a Toshiba Power Saver application which lets me control lots of settings for power management, and one of them is the processor speed - I can choose from level 1 to 4 and also choose the cooling method (eg min, medium max).
If you dont have a toshiba, this is probably not much use to you.How can I slow down or control the processor speed on my lap top?as people like to overclock their p.c,s and laptops ,their is a few users who underclock their computers,and the main reason is the same as yours,overheating
however ,your laptop shouldnt be overheating like it does,laptops are designed to be able to cope with the high clock speeds that the pentium 4 uses,so if it is still under warranty i would send it to be looked at as it sounds like a fan in the laptop is malfunctioning,and this is what is making the laptop so hot when used
if it were a tower,you could easily add extra ventelation,such as a rear chassis fan which only costs 8 but a laptop is a bit more difficult,that is why i recommend proffesinal advice
however ,for a short term fix,why not go into power options in control panel,and see if you can change any settings to ease the laptops resources,also it may not be your processor,it could be a overheating battery,to check if its your processor just press ctrl+alt+delete and when the windows task manager appears look at the processor usage at the bottom,and leave it on it for a while,if your laptop gets warmer,and the usage stays around 3% it isnt your processor,it must be your battery or even your graphic chip(or a defective fan)
either way,like i said,you should seek professinal advice,do not try and underclock(slow down) your processor,as any messing with your processor(overclocking or underclocking)is dangerous when you dont fully understand what you are doing,it can ruin your processor for good
however if you feel brave enough to do the job your self,its a case of going into bios(setup) press delete on start up ,and in set up look for power management or a similar named item and then its a case of lowering the clock speed bit by bit,do not lower it in one big amount,clock speeds are made up of 2 things,front service bus(fsb) and multiplyer,multilply thee two together and you get your clock speed
for example fsb 200mhz.....multiplyer 13.5 x
clock speed.....2.9 ghz
some times you lower using the multiplier but sometimes these are hard locked to stop overclocking ,and you can only use the fsb,then it is best to raise or lower these by the smallest possible frequency each time..allways save and exit each entry ,but be carefull overclocking can damage the processor and underclocking,well i dont know anyone who,s done this,so its a rough guess that i wouldnt lower it more than 400mhz taking it down to 2.8ghz
the rule of thumb is safe overclocking is normally 10 to 20% of the clock speed so if you apply that when underclocking you should be safe,that means you can underclock between 320 to 640 mhz but i would go for 400mhz lower
any probs let me know
good luckHow can I slow down or control the processor speed on my lap top?Computer might over heat when the fan gets blocked with dust and hair. Clean it out. It helped in my case.
Processor must be in touch with heat sink. There must be enough heat conducting gel between the two.
I read somewhere that you could change the settings of your processor so it runs at a lower speed. Any one know how this is or can be done?How can I slow down or control the processor speed on my lap top?I don't think you can slow down the processor speed enough to get it to run cooler. Why is your processor running so hot? You should keep the fans clear of everything, IE. don't put your laptop on a bed or surrounded by blankets.. this will get the laptop some room to disperse the heat and won't freeze up or crash.
You get special stands with fans on them where you can put the laptop on .. and they will help cool the thing down.
If nothing helps, take it back to the store and ask them to look at it. You might need more heat conductor gel or have them put the cpu heatsink back on it properly.How can I slow down or control the processor speed on my lap top?Sounds like you have a desktop chip in there ;) I'd swing by the BIOS when it starts up and see if you can lower the Front-side Bus to CPU multiplier.How can I slow down or control the processor speed on my lap top?You might have room for manouevre with Notebook Hardware Control (requires .netframework 2.0)
http://www.pbus-167.com/nhc/nhc.htm#anchHow can I slow down or control the processor speed on my lap top?I cant speak for other laptops, but on my Toshiba, I have a Toshiba Power Saver application which lets me control lots of settings for power management, and one of them is the processor speed - I can choose from level 1 to 4 and also choose the cooling method (eg min, medium max).
If you dont have a toshiba, this is probably not much use to you.How can I slow down or control the processor speed on my lap top?as people like to overclock their p.c,s and laptops ,their is a few users who underclock their computers,and the main reason is the same as yours,overheating
however ,your laptop shouldnt be overheating like it does,laptops are designed to be able to cope with the high clock speeds that the pentium 4 uses,so if it is still under warranty i would send it to be looked at as it sounds like a fan in the laptop is malfunctioning,and this is what is making the laptop so hot when used
if it were a tower,you could easily add extra ventelation,such as a rear chassis fan which only costs 8 but a laptop is a bit more difficult,that is why i recommend proffesinal advice
however ,for a short term fix,why not go into power options in control panel,and see if you can change any settings to ease the laptops resources,also it may not be your processor,it could be a overheating battery,to check if its your processor just press ctrl+alt+delete and when the windows task manager appears look at the processor usage at the bottom,and leave it on it for a while,if your laptop gets warmer,and the usage stays around 3% it isnt your processor,it must be your battery or even your graphic chip(or a defective fan)
either way,like i said,you should seek professinal advice,do not try and underclock(slow down) your processor,as any messing with your processor(overclocking or underclocking)is dangerous when you dont fully understand what you are doing,it can ruin your processor for good
however if you feel brave enough to do the job your self,its a case of going into bios(setup) press delete on start up ,and in set up look for power management or a similar named item and then its a case of lowering the clock speed bit by bit,do not lower it in one big amount,clock speeds are made up of 2 things,front service bus(fsb) and multiplyer,multilply thee two together and you get your clock speed
for example fsb 200mhz.....multiplyer 13.5 x
clock speed.....2.9 ghz
some times you lower using the multiplier but sometimes these are hard locked to stop overclocking ,and you can only use the fsb,then it is best to raise or lower these by the smallest possible frequency each time..allways save and exit each entry ,but be carefull overclocking can damage the processor and underclocking,well i dont know anyone who,s done this,so its a rough guess that i wouldnt lower it more than 400mhz taking it down to 2.8ghz
the rule of thumb is safe overclocking is normally 10 to 20% of the clock speed so if you apply that when underclocking you should be safe,that means you can underclock between 320 to 640 mhz but i would go for 400mhz lower
any probs let me know
good luckHow can I slow down or control the processor speed on my lap top?Computer might over heat when the fan gets blocked with dust and hair. Clean it out. It helped in my case.
Processor must be in touch with heat sink. There must be enough heat conducting gel between the two.
I have windows works word processor and i need to change the language from english to spanish...how do I?
I'm writing a paper for my spanish class and need to check some spelling.I have windows works word processor and i need to change the language from english to spanish...how do I?I'm not sure what Windows Works is, but here is what I do:
Click on %26quot;Start%26quot; at the bottom left of your screen.
Click on Control Panel
Click on %26quot;Keyboard%26quot;
Click on %26quot;Insert Locales%26quot; tab.
Choose Spanish and click %26quot;OK%26quot;
This switches your language however, if you don't have the language dictionary installed from your original software, it won't work. Good luck.
Note: Once you switch the language, your keyboard will be set for Spanish, so some of your numerical and symbols keys will be different. You can switch back by clicking on the %26quot;language%26quot; icon in your bottom tray (on the right.)cs files multiple tables
Click on %26quot;Start%26quot; at the bottom left of your screen.
Click on Control Panel
Click on %26quot;Keyboard%26quot;
Click on %26quot;Insert Locales%26quot; tab.
Choose Spanish and click %26quot;OK%26quot;
This switches your language however, if you don't have the language dictionary installed from your original software, it won't work. Good luck.
Note: Once you switch the language, your keyboard will be set for Spanish, so some of your numerical and symbols keys will be different. You can switch back by clicking on the %26quot;language%26quot; icon in your bottom tray (on the right.)
I think I just messed up my computer.....?
I have an AMD Duron processor. I was messing around in the settings menu or whatever you call it (in startup when you press delete) and I changed my processor speed from 100 mhz to 133mhz and now my computer wont boot- it just keeps on restarting and nothing is shown on the screen. Please help, I know how to take parts of my computer and stuff if I have to.I think I just messed up my computer.....?You need to reset yiur BIOS, there is a jumper block next to the BIOS battery, change the jumper to the other set of pins for about 30 seconds, and then put it back on the original pins. Your manual will show you what jumper to move and how to do it.
The other way is to remove the battery for about 30 seconds, and then replace it.
The other way is to remove the battery for about 30 seconds, and then replace it.
On my microsoft works word processor how do I change the search for english to spanish Word search so I can?
the words I want to Know?On my microsoft works word processor how do I change the search for english to spanish Word search so I can?Highlight the word that you want translated. Select tools %26gt; language %26gt; translate. Select the language and click OK.
The cost to change my laptop's processor?
Hey! everyone i just nedded to ask that if any of u knew how much it was worth to change my laptop's processor from pentium2 to pentium DThe cost to change my laptop's processor?for me is not advisable to upgrade the processor of laptop. Because it's almost you change the important parts of your laptop. It's better to buy a new one, Because if you want to change P2 to Pentium D you need also to change the mother board and the memory and maybe also the power supply and i dont know if your laptop casing is match to the pentium d motherboard.The cost to change my laptop's processor?You can't.
The processors are two completely different architectures separated by about 10 years of technological advancement.
You would need to buy a new computer.The cost to change my laptop's processor?I don't think you can do it without a mother board at which point you would be better off with a new machine. Check the site below to be sure.The cost to change my laptop's processor?about $100-$300 for used and for new about $100 to 400
The processors are two completely different architectures separated by about 10 years of technological advancement.
You would need to buy a new computer.The cost to change my laptop's processor?I don't think you can do it without a mother board at which point you would be better off with a new machine. Check the site below to be sure.The cost to change my laptop's processor?about $100-$300 for used and for new about $100 to 400
Is there a way to change the peroid size in microsoft works word processor?
I want to know how to do it in works wor processor not microsoft word.
i dont want to have to hight light each peroid either.Is there a way to change the peroid size in microsoft works word processor?Period Size. Insert Symbols%26gt; Find smaller dot
Font Size- Ctrl + and Ctrl Shift Plus
Iworks is Mac Word Processor.Is there a way to change the peroid size in microsoft works word processor?Try Ctrl+%26gt;(Ctrl+Shift+.). If that doesn't work, don't be lazy, highlight the dot.programming removing contact lenses
i dont want to have to hight light each peroid either.Is there a way to change the peroid size in microsoft works word processor?Period Size. Insert Symbols%26gt; Find smaller dot
Font Size- Ctrl + and Ctrl Shift Plus
Iworks is Mac Word Processor.Is there a way to change the peroid size in microsoft works word processor?Try Ctrl+%26gt;(Ctrl+Shift+.). If that doesn't work, don't be lazy, highlight the dot.
How do i change the speed of my dual core AMD processor?
I have a Turion 64 X2 processor (TL-58) and its supposed to be running at 1.9ghz but my computer says its only running at 768 mhz, where can i change it to be at full speed all the time. I couldnt find it anywhere in power management or anything like thatHow do i change the speed of my dual core AMD processor?That is odd that it is not running at its labeled speed. I would check your BIOS settings to see if your computer is limiting it for some reason.How do i change the speed of my dual core AMD processor?Uncheck 'Cool n Quiet' feature in CMOS BIOS.
How does the Ghz for a computer processor affect the computer's speed?
Basically, I'm asking how much of a computer's speed relies on the Ghz of the processor? Also, how does that change with different types of processors? To what extent would you take into consideration the Ghz of the processor when purchasing a computer?How does the Ghz for a computer processor affect the computer's speed?The more Ghz the better. When buying a computer you should always get the one with the faster processor, but you have to look at other specs too - how much ram a pc has can also affect its speed - the more the better, what kind of video card it has and other things like that. Don't worry about real fast processors unless your into gaming and 2.0 - 2.4 intel or amd will do the job if your into regular everyday web surfing and emailing, but if your a gamer go for 2.4 or faster dual core processor
Subscribe to:
Posts
(Atom)